After-sales Service: | Yes |
---|---|
Warranty: | 1 Year |
Type: | Centrifuge |
Discharge Pressure Boost: | 9.8-117kpa |
Relative Humidity: | 20-85% |
Color: | Custom Made |
Customization: |
---|
Suppliers with verified business licenses
DECENT MACHINERY offers a full range of multistage centrifugal blowers with 20 models to choose from. We have the right blower for your application today and our Research and Development department is developing new models to meet your needs tomorrow.
Sealing of the housing is by graphitized straps, or on the larger machines by segmented carbon rings, which are held together by a stainless steel spring. Leakage is thus reduced to a minimum with this type of seal. In the case of aggressive gases, sealing is by the use of double mechanical seals. The bearings are lubricated either using grease for machines up to 5000 m3/h or by oil replenishment by a constant level oiler for the larger machines.
Depending on the model, the inlet and outlet heads and intermediate sections are made of either cast iron or aluminium. In order to suit the pressure requirements, it is possible to vary the number of stages with a maximum of 10 on the small machines and 7 on the larger ones. The heads and intermediate sections are spotted to each other and clamped together by steel tie-rods.
Mutistage Centrifugal Blower | Multi-Stage Centrifugal Fan | Multi-Stage Centrifugal Fan |
Application:
1. Water Treatment
2. Wastewater Treatment
3. Biogas Recovery
4. Vacuum Cleaning
5. Air Knife Dry
6. Floatation and Mineral Beneficiation
7. Galvanization Process and Electric Plating
8. Fluid and Piscina Oxygenation
9. Process Gas Conveying
10. Papermaking and Printing
11. Air Firing (Desulfurization, Carbon Black, Blast Furnace Process, and so on
The centrifugal blower housing consists of an inlet head with a special feature to direct air to the inlet of the first impeller and outlet head of special design to eliminate friction and multiple intermediate sections.
These parts are made in cast aluminum according to rigid Continental Industrie specifications, extreme care to be exercised in the assembly of interlocking cast aluminum intermediate sections and annular diffusers (baffles). The entire assembly is securely held together actually with multiple tension rods which bind the entire housing into a solid integral unit.
There are no parts in relative creep during operation. Since there is no friction and therefore no lubrication is necessary, the conveyed air is not polluted. Moreover, the main advantages of using Decent Machinery multistage centrifugal blowers are:
1.Easy Installation;
2.Low Noise Level;
3.No Vibration;
4.Pulsation Free Gas Flow;
5.No Gas Contamination;
6.Minimal Maintenance.
Suppliers with verified business licenses